mixers - high ip3 - smt 9 9 - 356 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com hmc585ms8g / 585ms8ge high ip3 gaas mmic mixer with integrated lo amplifier, 400 - 650 mhz v01.0907 general description features functional diagram high input ip3: +33 dbm conversion loss: 9 db low lo drive: -2 to +4 dbm single supply: +5v @ 50 ma compact msop package: 14.8mm 2 electrical speci cations, t a = +25c, lo = 0 dbm, if = 50 mhz*, vdd= 5v typical applications the hmc585ms8g / hmc585ms8ge are ideal for: ? basestations & repeaters ? gsm, gprs & edge ? cdma & w-cdma ? cable modem termination systems the hmc585ms8g & hmc585ms8ge are high dynamic range passive mmic mixers with integrated lo ampli ers in plastic surface mount 8 lead mini small outline packages (msop) covering an rf range of 400 mhz to 650 mhz. the lo range of 300 mhz to 750 mhz supports both high side and low side lo applications. excellent input ip3 performance of +33 dbm for down conversion and +27 dbm for up conversion is provided for 2.5g & 3g applications at an lo drive of 0 dbm. rf conversion loss is 9 db typical. the dc to 250 mhz if frequency response will satisfy a wide range of tx and rx frequency plans. parameter min. typ. max. units frequency range, rf 400 - 650 mhz frequency range, lo 300 - 750 mhz frequency range, if dc - 0.25 ghz conversion loss 9.0 11 db lo to rf isolation 7db lo to if isolation 10 15 db ip3 (input) 30 33 dbm 1 db gain compression (input) 22 dbm lo input drive level (typical) -2 to +4 dbm supply current 50 ma *unless otherwise noted, all measurements performed as a downconverter, with high side lo & if = 50 mhz.
mixers - high ip3 - smt 9 9 - 357 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com conversion gain vs. temperature @ lo = 0 dbm isolation @ lo = 0 dbm conversion gain vs. lo drive return loss @ lo = 0 dbm if bandwidth @ lo = 0 dbm upconverter performance conversion gain @ lo = 0 dbm unless otherwise noted, all measurements performed as a downconverter, with high side lo & if = 50 mhz. hmc585ms8g / 585ms8ge high ip3 gaas mmic mixer with integrated lo amplifier, 400 - 650 mhz v01.0907 -25 -20 -15 -10 -5 0 0.37 0.42 0.47 0.52 0.57 0.62 0.67 +25c +85c -40c conversion gain (db) rf frequency (ghz) -60 -50 -40 -30 -20 -10 0 10 0.37 0.42 0.47 0.52 0.57 0.62 0.67 rf to if lo to rf lo to if isolation (db) rf frequency (ghz) -25 -20 -15 -10 -5 0 0.37 0.42 0.47 0.52 0.57 0.62 0.67 -4dbm -2dbm 0dbm +2dbm +4dbm conversion gain (db) rf frequency (ghz) -25 -20 -15 -10 -5 0 0.25 0.35 0.45 0.55 0.65 0.75 0.85 lo rf return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 0.37 0.42 0.47 0.52 0.57 0.62 0.67 conversion gain (db) rf frequency (ghz) -20 -15 -10 -5 0 0 0.05 0.1 0.15 0.2 0.25 return loss conversion gain response (db) if frequency (ghz)
mixers - high ip3 - smt 9 9 - 358 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com upconverter ip3 vs. lo drive, if= 50 mhz input p1db vs. temperature @ lo= 0 dbm input ip2 vs. temperature @ lo= 0 dbm input ip3 vs. temperature @ lo= 0 dbm input ip2 vs. lo drive input ip3 vs. lo drive hmc585ms8g / 585ms8ge high ip3 gaas mmic mixer with integrated lo amplifier, 400 - 650 mhz v01.0907 20 25 30 35 40 0.37 0.42 0.47 0.52 0.57 0.62 0.67 + 25c - 40c + 85c input ip3 (dbm) rf frequency (ghz) 20 25 30 35 40 0.37 0.42 0.47 0.52 0.57 0.62 0.67 lo = -4dbm lo = -2dbm lo = 0dbm lo = +2dbm lo = +4dbm input ip3 (dbm) rf frequency (ghz) 25 30 35 40 45 0.37 0.42 0.47 0.52 0.57 0.62 0.67 + 25c - 40c + 85c input ip2 (dbm) rf frequency (ghz) 20 25 30 35 40 0.37 0.42 0.47 0.52 0.57 0.62 0.67 lo = -4dbm lo = -2dbm lo = 0dbm lo = +2dbm lo = +4dbm input ip3 (dbm) rf frequency (ghz) 20 22 24 26 28 30 0.37 0.42 0.47 0.52 0.57 0.62 0.67 + 25c + 85c - 40c input ip3 (dbm) rf frequency (ghz) 15 20 25 30 35 40 0.37 0.42 0.47 0.52 0.57 0.62 0.67 lo = -4dbm lo = -2dbm lo = 0dbm lo = +2dbm lo = +4dbm input ip3 (dbm) rf frequency (ghz) unless otherwise noted, all measurements performed as a downconverter, with high side lo & if = 50 mhz.
mixers - high ip3 - smt 9 9 - 359 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com input ip3 vs. lo drive, if= 100 mhz input ip3 vs. lo drive, if= 150 mhz input ip3 vs. lo drive, if= 200 mhz hmc585ms8g / 585ms8ge high ip3 gaas mmic mixer with integrated lo amplifier, 400 - 650 mhz v01.0907 15 20 25 30 35 40 0.37 0.42 0.47 0.52 0.57 0.62 0.67 lo = -4dbm lo = -2dbm lo = 0dbm lo = +2dbm lo = +4dbm input ip3 (dbm) rf frequency (ghz) 10 15 20 25 30 35 0.37 0.42 0.47 0.52 0.57 0.62 0.67 lo = -4dbm lo = -2dbm lo = 0dbm lo = +2dbm lo = +4dbm input ip3 (dbm) rf frequency (ghz) 5 10 15 20 25 30 35 0.37 0.42 0.47 0.52 0.57 0.62 0.67 lo = -4dbm lo = -2dbm lo = 0dbm lo = +2dbm lo = +4dbm input ip3 (dbm) rf frequency (ghz) conversion gain vs. lo drive, if= 200 mhz -25 -20 -15 -10 -5 0 0.37 0.42 0.47 0.52 0.57 0.62 0.67 -4dbm -2dbm 0dbm +2dbm +4dbm conversion gain (db) rf frequency (ghz) unless otherwise noted, all measurements performed as a downconverter, with high side lo & if = 50 mhz.
mixers - high ip3 - smt 9 9 - 360 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com nlo mrf 0 1 2 3 4 0xx-426-1 8 150272224 26163505063 3202422270 478-126-4 rf freq = 0.5 ghz @ -10 dbm lo freq = 0.4 ghz @ 0 dbm all values in dbc below if power level (rf - lo). nlo spur at rf port lo freq ghz 1 2 3 4 0.3 17 36 31 39 0.4 10 40 20 33 0.5 6 32 18 31 0.6 6 34 23 33 0.7 6 28 34 41 0.8 6 26 48 xx lo power = 0 dbm all values in dbc below input lo level measured at rf port. mxn spurious outputs harmonics of lo hmc585ms8g / 585ms8ge high ip3 gaas mmic mixer with integrated lo amplifier, 400 - 650 mhz v01.0907
mixers - high ip3 - smt 9 9 - 361 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com absolute maximum ratings rf/if input +27 dbm lo drive +10 dbm bias supply (vdd) +7 vdc channel temperature 150 c continuous pdiss (t = 85c) (derate 13.2 mw/c above 85c) 0.85 w storage temperature -65 to +150 c operating temperature -40 to +85 c if dc current 40 ma outline drawing notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. dimension does not include moldflash of 0.15mm per side. 4. dimension does not include moldflash of 0.25mm per side. 5. all ground leads and ground paddle must be soldered to pcb rf ground. electrostatic sensitive device observe handling precautions part number package body material lead finish msl rating package marking [3] hmc585ms8g low stress injection molded plastic sn/pb solder msl1 [1] h585 xxxx hmc585ms8ge rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h585 xxxx [1] max peak re ow temperature of 235 c [2] max peak re ow temperature of 260 c [3] 4-digit lot number xxxx package information hmc585ms8g / 585ms8ge high ip3 gaas mmic mixer with integrated lo amplifier, 400 - 650 mhz v01.0907
mixers - high ip3 - smt 9 9 - 362 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pin number function description interface schematic 1lo this pin is ac coupled and matched to 50 ohm. 2n/c not connected. 3, 6, 7 gnd this pin must be connected to rf ground. 4vdd power supply for lo ampli er. an external rf bypass capacitor is required. 5if port this pin is dc coupled. for applications not requiring operation to dc this port should be dc blocked externally using a series capacitor. choose value of capacitor to pass if frequency desired. for operation to dc, this pin must not sink/source more than 40 ma of current or failure may result. 8rf port this pin is dc coupled and matched to 50 ohm. pin descriptions hmc585ms8g / 585ms8ge high ip3 gaas mmic mixer with integrated lo amplifier, 400 - 650 mhz v01.0907
mixers - high ip3 - smt 9 9 - 363 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com evaluation pcb list of materials for evaluation pcb 114445 [1] item description j1 - j3 pcb mount sma rf connector j4 - j5 dc pin c1 10,000 pf chip capacitor, 0603 pkg. u1 hmc585ms8g / hmc585ms8ge mixer pcb [2] 104813 evaluation board, 1.0 x 1.0 [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 the circuit board used in the nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con- nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. hmc585ms8g / 585ms8ge high ip3 gaas mmic mixer with integrated lo amplifier, 400 - 650 mhz v01.0907
|
